Getting started

Measure your table

Perfectly round, square, and rectangular tables don’t require table patterns – you can jump straight to our measuring guide.

Go to measuring guide

Create a pattern

If your table requires a pattern, we’ll mail you our tracing paper to make the pattern. The tracing paper will have instructions on how to create the pattern.

Request tracing paper

Measuring guide

Step 1: Table width

Measure the short side of the table first in inches- this is the width. Focus on the flat surface only and measure to the nearest 1/16″, avoiding any beveled or sloped edges.

Step 2: Table length

Measure the long side of the table in inches with the leaves removed – this is the length. Measure directly down the center, from end to end, only the flat surface, avoiding any beveled or sloped edges.

Step 3: Corner radius (rounded rectangular tables only)

Rounded rectanglular tables don’t require patterns, but you do need to measure the radius of the corners. Extend a tape measure from the edge of the table to just above where the corners start to curve, pulling it out about 10 inches.

Take a clear photo of the table and tape measure, similar to the example shown. This simple step ensures we get the perfect fit for your table!

Step 4: Leaf measurement

If applicable, measure the length of each extension leaf separately (refer to the image for guidance), excluding any molding, sloped, edges, or decorative details. Do not include the leaves in your overall table length measurement.

When placing your order, be sure to provide the total number of leaves and the exact length of each one.

Tips:

  • Use a metal tape measure for precision.
  • Do not include molding, sloped edges, or any decorative details around the perimeter in your measurements.
  • Take your own measurements. Manufacturer-provided measurements are not reliable as they often include molding or decorative details.
  • If your table does not have square corners (90°) or isn’t perfectly round, a pattern will be necessary.
  • Do not include any extension leaves in your overall measurements.

Got all your measurements? Explore our finishes and customize your perfect table pad.

Shop table pads

Measuring guide

If your table requires a pattern, submit a request and we’ll mail you out our tracing paper to make the pattern.

Step 1: Lay the pattern paper over the center split of your table and make sure it’s smooth with no wrinkles.

Step 2: Use tape or place heavy objects on the paper to keep it from moving around.

Step 3: Trace the edge of the table by rubbing the side of a pencil or crayon along it. Be sure to only trace the flat edge – don’t include any molding or sloped areas.

Tips:

  • When tracing, keep the point of the pencil facing the table, not the floor.
  • Hold the pencil as parallel as possible to the flat surface-don’t hold it upright like a rocket ship!
  • Never cut the pattern to make it fit into the envelope. If needed, just fold it again.
Request tracing paper